Regardless of the love you have for your new house, immediately you sight the wallpaper in the living room, you knew it had to be removed. Wallpaper removal is now a common thing in homes, whether to remove it completely or replace the one there.
However, there are some important tools that you will need to get your wallpaper removal, replaced, or hanging done. You don’t need to stress yourself as we will point you to the right tools needed to get the job done.
You can get all the necessary wallpaper tools needed for your upcoming project when you the exact ones to get. Before you start, gather the right tools that depend on the type of wallpaper you have in your home. This guide will assist you in identifying your wallpaper and getting its removal done easily.
Regardless of the type of wallpaper installed in your household, the following are the required tool for successful wallpaper removal:
- Old towels: These are to be used as cover to protect your baseboards.
- Plastic drop cloths: Place these on the towels and tape them to the baseboards to prevent any mess from getting on the floor.
Removing Various Types of Wallpaper
Aside from the normal supplies, the type of wallpaper you have will determine the tools required to remove it.
Below are the potential tools you may need:
1. Strippable Wallpaper
Everyone knows that wallpaper removal is a tough task. Fortunately, manufacturers in recent years considered this to strip new wallpaper and remove them easily.
If you are aware of the fact that the wallpaper was hung in recent years, you may then be in luck. The materials you need for removal of strippable wallpaper include a ladder to reach higher areas as well as a razor knife to remove stubborn wallpaper.
Asides from that, you can remove the wallpaper with your hand. Wallpaper strippers can remove stubborn adhesive effectively by dissolving or loosening it. You can get strippers in ready-to-use or concentrated formulas in liquid or gel form.
Brush or spray bottles can be used to apply strippers. If the wallpaper you are removing is washable, just score the wallpaper to assist the stripper to get to the adhesive.
2. Peelable Wallpaper
This contains a vinyl topcoat that often comes off easily, just like strippable wallpaper. Once this is removed, you are left with only the backing. The following tools will be required for removal:
- Liquid stripper concentrate: Use hot water to mix this to the manufacturer’s instructions. This product is specially made to soften the adhesive, so you can easily remove the wallpaper.
- Broad brush or sprayer: Paste the liquid stripper to the wall with any of these tools, starting from top to bottom one area at a time.
- Plastic scraper: After leaving the liquid stripper to get the wallpaper softened for some minutes, use a scraper to strip it away. Scrapers are a very important tool for wallpaper removal regardless of the technique you choose. They enable you to easily and accurately scrape the wallpaper from the walls easily once treated. Make sure you get replacement blades before you checkout, so you have a new blade for your upcoming project.
- Coarse sandpaper or a scoring tool: If the paper refuses to absorb the stripper, use one of these tools to scuff the surface. Mist the paper again and leave it for 30 minutes before you start scraping again.
3. Washable Wallpaper
This contains a plastic film that cannot be easily peeled off. The following tools will be needed for this job:
- Scoring tool: This tool will create tiny holes in the wallpaper to enable water to enter through the plastic film. Strongly adhered wallpaper can be easily removed from plaster walls through the use of scoring tools. It makes small holes in the wallpaper, giving the wallpaper remover to get through and loosening the adhesive to easily remove the wallpaper.
- Pump sprayer or spray bottle: Dampen the wallpaper with water, targeting your spray at the slits made with the scoring tool.
Putty knife: Leave for about ten minutes and then scrape off the paper using our putty knife.
Using Steam to remove Wallpaper
Steam stripping may be required for older peelable or washable wallpaper. Fortunately, you don’t necessarily need to purchase a wallpaper steamer; you can rent one to keep the cost lower.
You can knock down the interior wall together with the wallpaper to beat the wallpaper removal process. This gives you a customizable living space that makes your household look bigger and better serve your needs.
Power steamers remove wallpaper using steam and are the easiest and cleanest wallpaper removal method. Just fill the steamer with tap water and place it up against the wall.
The steam enters the adhesive and enables you to easily scrape off the wallpaper. To get the best results, score the wallpaper before you start steaming.
This enables you to hang and remove wallpaper easily while protecting your drywall and getting rid of split seams and curled edges. Just clean the surface and leave the wall to dry. Then paste the primer using a brush, sprayer, or roller.
The additional tools include:
- Adhesive: This enables wallpaper to glue to the wall and is important for non-prepasted wallpaper. If you plan to replace the wallpaper at any point, go for strippable wallpaper adhesives, which allows for quick and easy removal. The adhesive is already included in pre-pasted wallpaper, but it still needs an activator for proper adhesion. Even though you can activate the adhesive using water, the use of activator prevents oversaturation and enhances bonding strength.
- Paste brushes: This gives you the chance to apply wallpaper paste perfectly, preventing it from peeling, rising edges, and ripping. Use a smoothing tool or brush to smoothen air bubbles and creases immediately you have your wallpaper on the wall. This results in a beautiful and bubble-free finish.
- Trim knives: This gives you the chance to trim your wallpaper properly at the joint with the ceiling and baseboard, which is important for giving your wallpaper a professional and attractive look.
- Seam rollers: This makes sure that your wallpaper is seamless as it creates a perfect bond between several wallpaper sheets and boundaries. If you started noticing peeling on your wallpaper or loosening around its edges, just seam and fix adhesive to fix it. You will save time and money through this easy-to-use, fast-drying product.
- The in-between tool: Wall-covering sponges can be used in multiple ways, and is important for wallpaper replacement. You can also apply stripper, remove the paste, wash walls during wallpaper removal, and to smoothen out wallpaper immediately it’s on the wall with wall-covering sponges. These sponges are durable and can handle everything.
What is the easiest old wallpaper removal method?
Removal of older wallpaper can be done by filling a garden sprayer with water and wallpaper removal solution and liberally applied to the wallpaper. Allow the wallpaper to soak for 15 to 20 minutes and then peel the paper away using a scraper or putty knife.
Which homemade wallpaper remover is the best?
Grab a spray bottle and mix equal parts of hot water and fabric softener. This method is most effective by concentrating on small areas and working your way slowly through the whole wall. Use fabric softeners to dampen the wallpaper and allow it to soak for some minutes. Peel off the wallpaper from the wall using a putty knife.
How do you remove wallpaper without using a scraper?
Wallpaper can be removed with the use of plain old water. Get a clean spray bottle, fill it with hot water, and dampen the wallpaper using water. Leave it to soak for 20 minutes so it can loosen up and cause the adhesive to remove from the wall. Then, start removing the mist wallpaper with a scraper.
How do you prepare walls after wallpaper removal?
Begin by applying a skim coat to the surfaces with a 12inch drywall blade and joint compound. Then start hitting all the high areas with a pole sander and sand the wall properly. Wipe the surface down using wet cloths to remove the dust. Now,you have a uniform and smooth walls, and properly prepared for a fresh coat of paint.
Can wallpaper be removed using fabric softener and vinegar?
There are many recipes for wallpaper removal. You can mix 1/3 cup of fabric softener, 2/3 cup of water, or add 1 cup of white vinegar to one bucket of hot water. Dampen the wallpaper thoroughly and leave it until it can be peeled.
Is priming necessary after wallpaper removal?
Yes. Once you’ve removed the entire adhesive and you have a smooth surface, apply one coat of nice latex primer. You can choose from Zissner 123 and Gripper. If there is adhesive on the surface, soften the latex and lift the remaining glue using a Universal Oil Base such as Kilz.
Professional Wallpaper Removal
Wallpaper removal can take an entire day; and that is only if you are working on just a room. You can arrange a wallpaper removal service with our company if you cannot wait or go through the stress.
We will apply a fresh coat of interior paint on your wall after removing the old, rough-looking paper from it to give it a totally new look. Contact us now to learn more about our service.